CDX Firmware Ver.2.0

CDX-05 Firmware ver2.0 now available! Get the latest firmware and upgrade your CDX-05/CDR-07!

MAIN FEATURES

1. Back spin update
Until now, you couldn't backspin a CD, because once you let it go in scratch mode, the CD went back to normal play. We've updated the detection system making it possible.

2. Filter effect update
a) Originally the filter effect started right away when you pushed the button. In ver.2.0 the effect remains to be DRY when the button is pushed and blends to WET by moving the jog wheel.
b) The Hi pass filter turns on with the first spin to the right, and enters Band pass filter on the second spin, sweeping towards low frequencies. The effect goes back to DRY by spinning it to the opposite direction. The Low pass filter will turn on with the first spin to the left, and enters Band pass filter on the second spin, sweeping towards high frequencies. The effect goes back to DRY by spinning it in the opposite direction.
c) The frequency point selected with the jog wheel remains where it is, even when the effect is turned off. Push the filter button for more than 2 seconds to clear the memory point.

3. Master tempo update
Sound quality has improved when using +/-8% master tempo.

4. Effect sync switch update
We've updated the switch to be turned on before selecting an effect (delay/flanger/filter) for speedy operation.

5. BPM TAP system software update

6. CUE 1 to CUE 3 selectable while spinning the jog wheel.

7. The time display doesn't go off when reversing the jog wheel at the start of track 1.

8. TT-M1 operation update
a) Scratch mode turns off
b) Speedy searching with FF/REW buttons
c) CD ejects

1.Before use

Please observe the following service conditions in terms of using the attached software/driver. DO NOT use the software/driver if the service conditions cannot be observed.

2.Disclaimer
Vestax support website users:
Vestax Corporation (hereunder "Vestax") does not warrant the software (including revisions and updates) provided from the Vestax support website (hereunder "the website"), or any information provided with the software in writing (All information is not provided of the software). All software downloadable from the website (hereunder "the software") are provided AS IS, and is provided without warranty of any kind, whether express or implied, including but not limited to implied warranties of merchantability, fitness for a particular purpose and noninfringement of third party rights or arising from a course of dealing, usage or trade practice. All responsibility of using the software lies with the user. On no event will Vestax be liable to the user for any direct or indirect loss, contingency damage or descendent damage arising out of the use or inability to use the Software, even if Vestax has been advised to the possibility of such damage, or to complaints raised from third parties.

3.Copyright
Vestax holds all copyrights of all Software (Defined above) The Software cannot be redistributed, redesigned, reverse engineered or disassembled.

4.Software information
Software: "CDX05V2.exe", "CDR07V2.exe"
Version: CDX05: No1.14 / CDR07: No1.09
Category: Firmware update Version2
Updateable model: CDX-05, CDX-05 WHT, CDR-07
If you agree to the terms above, click the I AGREE button below and download the Software.
CDX & CDR Version 2 Firmware Update Precaution
Please read the following precautions before updating the firmware.
This software is designed exclusively for Vestax's CDX-05 and CDR-07.
Please follow the instructions in the manual to update the software.
DO NOT turn off the power of the CDX-05/CDR-07 while updating the firmware, it may cause damage to parts of the circuitry. New circuitry boards will be required for repair and will not be covered by warrant.
Check the firmware version in your CDX-05/CDR-07 before updating and make sure to update it to a newer version. Re-check the version when the update is completed.
How to check the firmware version:
Push TAP +PITCH together and TIME with no CD inside the player. (Have the tray open for CDR-07) The current version will be displayed. If you are updating a CDX-05, the procedure will change depending on the current firmware version.
[IMPORTANT]
The user will be responsible for all damage caused updating firmware not following the precautions above.
[NOTE]
Refer to below to check the firmware version and for update steps.

CDX Version2 Firmware update manual
How to check the firmware version:
Push TAP +PITCH together and TIME with no CD inside the player. (Have the tray open for CDR-07) The current version will be displayed.
Updating CDX-05
If the current version is 1.14, it is the newest version and does not require updating.
Updating CDR-07
If the current version is 1.09, it is the newest version and does not require updating.
A. Download software
1. Create a folder in your computer to save the download data before downloading the software.
2. Click the download button below and select "Save target to file" to start the download. Select the folder created in step 1 as the folder to save the data.

Download file
Current CDX-05 firmware version older than 1.14:
Download CDX-05 Version 2 Firmware file [CDX50V2.exe 188KB (188,000bytes)]
Current CDR-07 firmware version older than 1.09:
Download CDR-07 Version 2 Firmware file [CDR07V2.exe 193KB (193,000bytes)]

B. Burn software to a blank disc
1. Create an update disc by burning the downloaded data to a blank disc. The download data self decompresses itself by double clicking it. CDX-05v2 will include 8 files; CDR-07v2 will include 7 files, all saved to the folder created in step 1.
C. Firmware Update
(1) Turn ON the power of the CDX-05/CDR-07
(2) Push the search button (FF &RW) and eject button together.
(3) The LCD display will say update
(4) Insert the update disc.
(5) The current version will be shown
(6) Push TIME/ENTER
(7) The version in the disc will be shown
(8) Push TIME/ENTER
(9) The display will say SURE, push TIME/ENTER to execute the update, turn OFF the power to not execute.
(10) The update will begin
(11) The display will say COMPLETE once the procedure is finished
(12) Push EJECT and take out the update disc
(13) Push Time/Enter, Rotate platter to 7 (F PrE) and press Enter again as "SURE" will be displayed and press Time/Enter again to Reset all Presets
(14) Push Time/Enter, Rotate platter to 8 (ALLCLr) and press Enter again as "SURE" will be displayed and press Time/Enter again to Clear memory data.
(15) Turn OFF the power.
(16) Update completed.
To check if the firmware is updated:
Push TAP +PITCH together and TIME with no disc inside the player. (Have the tray open for CDR-07) The current version will be displayed.

Elastic Audio Manipulate the tempo and feel of your music as it plays.   Uninterrupted Creative Flow Record, mix, match and add effects without ever stopping the music.   Defy the Timeline Freely improvise musical structure instead of constructing it. For Studios Bring the creative power of Live to your studio environment.   For Players and Composers Ready to play on stage and compose in the studio, right out of the box.   For Sound Designers Create radical variations of your samples in real time. For DJs Elevate your DJ sets. Remix, mash up and produce your music.   No Idea Lost Effortlessly build and browse your library of musical ideas.   Hands On Control Express yourself with your hands (or your feet!)   Live 6 Demo Download. Live 6 is available now, and it can be downloaded here. New and Improved! Get a glimpse of what's new in version 6.

CDJ/DVJ Firmware Update Announcement

Improve Master Tempo quality and Readability of Dirty or Scratched Discs

OCTOBER 30, 2006, Today Pioneer announces a firmware update for the CDJ-1000 Mk3, CDJ-800 Mk2 and DVJ-1000. The update improves functionality as described below and is recommended for all users. These upgrades are for the following products:

CDJ-800MK2: Version 1.70 or earlier

CDJ-1000MK3: Version 2.00 or earlier

DVJ-1000: Version 1.30 or earlier

MASTER TEMPO QUALITY IMPROVED: Better preservation of sound quality while using the Master Tempo function.

IMPROVED READABILTY OF DIRTY OR SCRATCHED DISCS: Increases the product's ability to play back unclean or damaged discs. PLEASE NOTE: The update will improve the system's capability to compensate for certain limited anomalies such as discs with minor scratches and unclean surfaces. Discs should always be kept clean and free from damages. Even with this update, the products may not be able to play all discs depending on the degree of damage.

How you can obtain firmware?

Follow the links below.

We thank you for your loyalty and we are committed to continuing to offer products that excel our customers expectations.

Pioneer Electronics

results taken from: www.threedworld.com.au/dma



By now should be aware of who took home the gongs at this year's DMAs, but if you missed Friday night's action at Home Nightclub - here are the highlights. The night belonged to The Hilltop Hoods who took out a massive six trophies, including best single (The Hard Road), Best Album and Best Hip Hop Group. Headline act the Midnight Juggernauts took out Debut Artist gong, Kid Confucius walked away with Best Urban Artist and man of the year Ajax took out the Best Aussie DJ Award

Best Video Clip
The Presets – Are you the one?

Best Urban Act
Kid Confucius

Best Debut Artist
Midnight Juggernauts

Best Producer
Suffa from Hilltop Hoods

Best Live Act
Hilltop Hoods

Best Remix
Suffa Remix 'The Hard Road' Hilltop Hoods

Best Compilation
Modular Presents Leave them all behind

Best Mix CD
Inthemix 05 – Ajax & Tiga

Best Independent Label
Obese Records

Best Hip Hop Act
Hilltop Hoods

Best Turntablist
Dexter

Best International – People's Choice
James Zabiela

Best Event – People's Choice
Big Day Out


Best Club Night – People's Choice
NSW/ACT – Kink
VIC – One Love
QLD – Saturdays @ Family
SA – HQ
WA – Saturdays @ The ChurchBest

DJ – People's Choice
NSW/ACT – Ajax
VIC – John Course
QLD – Baby Gee
SA – Debris
WA – Kenny L



Best Radio Show – People's Choice
FBI Sunsets

Best Single
The Hard Road – Hilltop Hoods

Best Album
The Hard Road – Hilltop Hoods

Best DJ
Ajax

Outstanding Contribution to Dance
John Course

News |